What Should Short-Term Acute Care Hospitals Do With the Q2 FY 2026 PEPPER?

Jessica Miller, MHA, CPC, CPC-I

14 min read · November 19, 2026

Photograph of two hospital coding-compliance colleagues reviewing closed folders and a report at a meeting table, representing what short-term acute care hospitals should do with the Q2 FY 2026 PEPPER.

CMS released the Q2 FY 2026 PEPPER for short-term acute care hospitals on September 30, 2026, and the November 19 MLN Connects newsletter reminded hospitals to download it. The PEPPER report covers 12 quarters of Medicare claims. It flags areas for review. It does not identify payment errors.

Q2 FY 2026 short-term acute care PEPPERWhat the official sources say
ReleasedSeptember 30, 2026
MLN Connects reminderNovember 19, 2026
Data windowQ3 FY 2023 through Q2 FY 2026, the most recent 12 quarters
Release cycleQuarterly for short-term acute care hospitals
Where to get itPEPPER Portal, pepper-file.cbrpepper.org
High outlierAt or above the 80th percentile, all target areas
Low outlierAt or below the 20th percentile, coding-focused target areas only
Reportable data11 or more numerator discharges for a target area in a period
Claims left outClaims submitted to a Medicare Advantage plan
Target-area changesNone in this edition
ContractorIndex Analytics LLC, with Integrity Management Services, Inc. and GovCon Growth Solutions, LLC

Sources: MLN Connects, November 19, 2026 , the PEPPER FAQ , the ST PEPPER User Guide, Q2 FY 2026 Release and the Q2 FY 2026 release webinar .

What did CMS release in the Q2 FY 2026 PEPPER?

CMS released the second quarter FY 2026 Program for Evaluating Payment Patterns Electronic Report (PEPPER) for short-term acute care hospitals on September 30, 2026. The November 19, 2026 MLN Connects newsletter ran it as a download reminder.

The PEPPER site describes the report as "a Microsoft Excel file summarizing provider-specific Medicare data statistics for target areas often associated with Medicare improper payments due to billing, DRG coding, and/or admission necessity issues." Target areas are set by CMS.

The PEPPER FAQ says the report displays all target areas for the most recent 12 quarters available. The release webinar puts this edition at quarter 3 of fiscal year 2023 through quarter 2 of fiscal year 2026. In the Medicare fiscal year, Q2 runs January through March, so the newest quarter in the file is January through March 2026.

CMS's MLN item says, "Your PEPPER helps you review your billing data to make sure claims are accurate." It lists four uses:

  • "Spot billing patterns that may need review or improvement"
  • "Identify areas that may need closer monitoring or internal audits"
  • "Find services that may be under-coded or over-coded"
  • "Track trends like longer patient stays"

CMS distributes PEPPERs quarterly to short-term acute care hospitals and annually to other facility types, so this release is not the PEPPER for critical access hospitals, skilled nursing facilities or home health agencies. The user guide excludes claims submitted to a Medicare Advantage plan. The webinar says the report reflects only final action claims with a valid medical record number that Medicare paid.

The ST PEPPER User Guide for this release says, "No changes to this edition." Use the FY 2026 target-area definitions in Table 2 of that guide. The guide and the FAQ name Index Analytics LLC, with its partners Integrity Management Services, Inc. and GovCon Growth Solutions, LLC, as the contractor that develops and distributes PEPPER under contract with CMS.

How do hospitals get access to their PEPPER?

Authorized officials (AOs), access managers (AMs) and staff end users (SEUs) can download their organization's report from the PEPPER Portal . For a staff member working out how to access PEPPER for the first time, the MLN item gives three steps:

  1. Sign in to the CMS Identity & Access (I&A) Management System using your existing NPPES or PECOS credentials.
  2. Request the PEPPER business function for your organization. The Comparative Billing Report business function is also available, and you can request it at the same time.
  3. Your AO or AM must approve your request.

The PEPPER FAQ adds that once approved, SEUs use the same login they use for NPPES and PECOS. Users who can reach the portal can submit a PEPPER help desk ticket once logged in. The MLN item points AOs and AMs to the I&A Quick Reference Guide and FAQs for step-by-step instructions, and to the External User Services Help Desk. The PEPPER FAQ says to contact that help desk if you cannot log in to the Portal.

If only one AO can open the file, the review stalls. Decide now who in HIM, CDI and compliance needs the PEPPER business function, and get those requests approved before the next quarterly release.

What do the 80th and 20th percentiles mean in PEPPER?

PEPPER flags outliers using preset control limits. The FAQ says, "The upper control limit for all target areas is the 80th percentile. Coding-focused target areas also have a lower control limit, which is the 20th percentile." So a high outlier can appear in any target area. A low outlier is reported only for coding-focused target areas.

Each hospital is compared with three groups: the nation, its Medicare Administrative Contractor (MAC) jurisdiction, and its state. The FAQ says outlier status should be evaluated in this priority order: nation, then jurisdiction, then state, because the state has the smallest comparison group. The user guide adds that "PEPPER does not use formal statistical significance testing to determine outlier status."

Blank cells are normal. In the user guide, reportable data means 11 or more numerator discharges for a target area in a period, and PEPPER does not display statistics below that. The release webinar slides describe sufficient data as "more than 11 discharges," so use the user guide's "11 or more" as the definition. A jurisdiction or state percentile is not calculated when fewer than 11 hospitals in that group have reportable data. A blank area is not a clean result. It means there was too little data to show.

Which PEPPER target areas are coding-focused?

The release webinar says the short-term PEPPER has 24 target areas, and the first 10 are coding-focused: Stroke Intracranial Hemorrhage, Respiratory Infections, Simple Pneumonia, Septicemia, Unrelated OR Procedure, Medical CC or MCC, Surgical CC or MCC, Single CC or MCC, Severe Malnutrition and Ventilator Support. PEPPER flags both high and low outliers for these 10.

The user guide explains why the CC and MCC areas get attention: "Oversight agencies have found coding errors in which a CC or MCC was added without sufficient documentation in the medical record to support the diagnosis." Table 3 of the guide suggests a first step for each coding-focused area:

Target areaHigh outlier (at or above 80th percentile)Low outlier (at or below 20th percentile)
Stroke Intracranial HemorrhageReview a sample of medical records for these DRGs to determine whether coding errors exist.Review a sample of medical records for other DRGs, such as DRGs 067, 068, or 069, to determine whether coding errors exist.
Respiratory InfectionsReview a sample of medical records for these DRGs to determine whether coding errors exist.Review a sample of medical records for other DRGs, such as DRGs 179, 193, 194, or 195, to determine whether coding errors exist.
Simple PneumoniaReview a sample of medical records for these DRGs to determine whether coding errors exist.Review a sample of medical records for other DRGs, such as DRGs 190, 191, 192, or 195, to determine whether coding errors exist.
SepticemiaReview a sample of medical records for these DRGs to determine whether coding errors exist.Review a sample of medical records for other DRGs, such as DRGs 689, 690, 193, 194, 195, 207, or 208, to determine whether coding errors exist.
Unrelated OR ProcedureReview a sample of medical records for these DRGs to determine whether the principal diagnosis and principal procedure are correct.No intervention is necessary.
Medical CC or MCCA sample of medical records for medical DRGs with CCs or MCCs should be reviewed to determine whether coding errors exist.A sample of medical records for medical DRGs without a CC or MCC should be reviewed to determine whether coding errors exist.
Surgical CC or MCCA sample of medical records for surgical DRGs with CCs or MCCs should be reviewed to determine whether coding errors exist.A sample of medical records for surgical DRGs without a CC or MCC should be reviewed to determine whether coding errors exist.
Single CC or MCCA sample of medical records for a single CC or MCC should be reviewed to determine whether coding errors exist.A sample of medical records for medical and/or surgical DRGs without a CC or MCC should be reviewed to determine whether coding errors exist.
Severe MalnutritionA sample of medical records with a severe malnutrition code as the only MCC should be reviewed to determine whether coding errors exist.A sample of medical records should be reviewed to determine whether coding errors exist.
Ventilator SupportVerify that the number of continuous invasive mechanical ventilation hours was coded accurately.Review cases with ICD-10-PCS procedure codes 5A1935Z (mechanical ventilation less than 24 consecutive hours) and 5A1945Z (mechanical ventilation 24-96 consecutive hours) to verify that the number of continuous invasive mechanical ventilation hours was coded accurately.

Source: ST PEPPER User Guide, Q2 FY 2026 Release, Table 3. The guide notes, "These are generalized suggestions and may not apply to all situations."

How do coding, CDI and revenue integrity teams turn PEPPER into an audit plan?

Start with the Compare Targets Report. The user guide calls it "the only report in PEPPER that allows hospitals to assess high and low outlier status for all target areas simultaneously," and says hospitals can use it "to help prioritize areas for auditing and monitoring." Then work through these steps:

  1. Read outlier status by nation first, then jurisdiction, then state.
  2. Rank flagged areas using the "Sum of Payments" and "Number of Target Discharges" columns, as the user guide suggests.
  3. Check volume. For each target area, the guide says to assess whether there is sufficient volume, "typically 10 to 30 discharges per year, depending on the hospital's total annual discharges, to justify a review of cases."
  4. Find the cases yourself. The PEPPER Team cannot provide a listing of patients. The FAQ says providers should be able to identify them with the same claims inclusion and exclusion criteria and the target area numerator definition.
  5. Pull a sample and compare each record with the claim, using the Table 3 step for that area.
  6. Record what the sample showed, what was corrected or queried, and what education followed.

CDI has a clear role on the CC and MCC areas. The user guide's suggestions include "Consider whether the use of a physician query would have substantiated a CC or MCC" and, where particular diagnoses prove problematic, "provide education." The guide also reminds teams that a CC or MCC diagnosis must be determined by a physician.

The guide frames all of this as compliance program work: "As part of its compliance program, a hospital should conduct regular audits to ensure charges for Medicare services are correctly documented and billed." For audit metrics and CDI measures, see our post on periodic coding audits that measure CDI effectiveness . For the wider oversight picture, read HHS OIG's 2026 top challenges for coding audit risk .

Does a PEPPER outlier mean an audit or a payment error?

No. The PEPPER FAQ answers this directly: "PEPPER does not identify the presence of payment errors, but facilities can use it as a guide for auditing and monitoring efforts." The ST PEPPER User Guide uses the same words: "PEPPER does not identify the presence of payment errors." The release webinar adds, "PEPPER does not identify improper Medicare payments."

An outlier percentile is a reason to review a target area. It is not proof of over-coding, under-coding or an improper payment. PEPPER does not say whether a hospital will be audited. The user guide notes that changes in a hospital's statistics can reflect staff turnover, new service lines or shifts in patient population and case mix, not only coding.

Keep PEPPER separate from improper payment rates when you brief leadership. FY2026 CERT data on improper payments is a different CMS measure with a different method, and a PEPPER percentile is not a CERT finding. Neither one is a fraud finding. In the same MLN Connects newsletter , CMS says, "Improper payment rates do not measure fraud." Some improper payments reflect missing documentation or administrative errors.

Where do pre-bill coding review and an audit trail fit?

PEPPER looks back at final action claims that Medicare paid. It shows where to look, not what went wrong. When a review confirms a coding pattern, the useful next step is to check that pattern before claims go out, and to keep each code tied to the documentation that supports it. That is our reading, not a CMS finding. Nothing in PEPPER says pre-bill coding QA will move a hospital's percentiles.

A clean, documented claim and a retained audit trail can help a team investigate a target area and show what was reviewed. Our post on what a medical coding audit trail must show covers the evidence to keep. For the controls around it, see revenue integrity in healthcare , and if a review leads to corrected or denied claims, our coding denials playbook covers the follow-up.

MediCodio AI works on the coding side of that review. Complete charts flow through AutoPilot for fully autonomous coding. Charts where the documentation is thin or contradictory stay in CoPilot, where certified coders review and finalize the output. Nothing runs autonomous on day one. Everything starts in review. MediCodio AI keeps a 100% code-level audit trail. Every code ships with its documentation passage and the compliance rule behind it. For charts MediCodio AI coded, your team can see why each code was assigned when a PEPPER review pulls them into a sample. The PEPPER review itself, and the decisions that come out of it, stay with your coding, CDI and compliance teams.

Frequently asked questions

When did CMS release the Q2 FY 2026 PEPPER for short-term acute care hospitals?

CMS released it on September 30, 2026. The November 19, 2026 MLN Connects newsletter was a reminder to download it, so the file has been on the PEPPER Portal since late September. CMS distributes PEPPERs quarterly to short-term acute care hospitals and annually to other facility types, such as critical access hospitals.

Who can download a hospital's PEPPER?

Authorized officials, access managers and staff end users can download it from the PEPPER Portal. A staff end user signs in to the CMS Identity & Access Management System with existing NPPES or PECOS credentials, requests the PEPPER business function, and needs approval from the organization's AO or AM before downloading.

What time period does the Q2 FY 2026 PEPPER cover?

PEPPER displays all target areas for the most recent 12 quarters available. For the Q2 FY 2026 short-term acute care PEPPER, that means services rendered from quarter 3 of fiscal year 2023 through quarter 2 of fiscal year 2026. In the Medicare fiscal year, Q2 runs January through March.

Does being a PEPPER outlier mean our hospital made payment errors?

No. The PEPPER FAQ says PEPPER does not identify the presence of payment errors, but facilities can use it as a guide for auditing and monitoring. An outlier is a reason to review a sample of records in that target area. It is not proof of over-coding, under-coding or an improper payment.

Can the PEPPER Team send a list of patients in a target area?

No. The PEPPER Team cannot provide a listing of patients related to the target areas. Providers should be able to identify those patients using the same claims inclusion and exclusion criteria and the target area numerator definition in the ST PEPPER User Guide, then pull a sample of those records.

Book a Demo to see how MediCodio AI codes your own charts, with the documentation passage and compliance rule behind every code. This article is general information, not legal advice. Book a Demo

Sources

  • CMS. MLN Connects Newsletter for November 19, 2026, "Short-Term Acute Care Hospitals: Download Your Q2 FY 2026 PEPPER." https://www.cms.gov/training-education/medicare-learning-network/newsletter/mln-connects-newsletter-november-19-2026
  • PEPPER. Short-Term Acute Care Hospital PEPPER User Guide, Q2 FY 2026 Release, September 2026. https://pepper.cbrpepper.org/resources/home/ST-PEPPER-UG-Q2-FY-2026-Final.pdf
  • PEPPER. Q2 FY 2026 Short-Term PEPPER release webinar transcript. https://pepper.cbrpepper.org/resources/home/Q2FY2026_ST_%20Webinar_Transcript.pdf
  • PEPPER. Q2 FY 2026 Short-Term Acute Care Hospital PEPPER release webinar slides. https://pepper.cbrpepper.org/resources/home/STACH_PEPPER_Webinar_Q2FY2026.pdf
  • PEPPER. Frequently Asked Questions. https://pepper.cbrpepper.org/faq.html
  • PEPPER. Training & Resources for Short-Term Acute Care Hospitals. https://pepper.cbrpepper.org/training-short-term-acute-care.html
  • PEPPER. What is PEPPER? https://pepper.cbrpepper.org/index.html

See it in action

Ready to transform your medical coding?

See how MediCodio's AI platform delivers 98%+ accuracy across deployments since 2023, with turnaround under 24 hours at enterprise volume, inclusive of coder review, across 35+ specialties.

About the Author

JM
Jessica MillerMHA, CPC, CPC-I

Founding Member & Product Evangelist

Jessica Miller is the Head of Coding Operations at MediCodio, where she leads our AI-powered medical coding services with over a decade of experience in medical coding, compliance, and healthcare management. She specializes in developing innovative medical coding workflows that combine human expertise with cutting-edge technology to deliver exceptional accuracy and efficiency for healthcare organizations.

LinkedIn

Loading posts...